Features
Particulae calculis detectors
Longinquus tribulationis sagittam dirigens et calibration sunt intellexit.
Valde automated. Non opus est manually adjust in test concentration.
switch ad test aerosol.
Fortis notitia repono et processui facultatem.
Secundum
Niosh XLII Cfr Part LXXXIV, en CXLIX, ASTM F2100-3.1.4, en (CXL) DCLXXXIII: MMV etc.
Applications
Filtration eficius et resistentia test pro filter media, larva (respirator) et parva filter elementum.
Qualitas imperium et materiae inspectionem pro filter media, larva et filter manufacturers.
Interface et software
Analysis
Users potest eligere batches ex database et ratio erit statim generate test eventus ad theaverage, maximam, minimum et deviationis.
Load test pro larva (1406D-pro +)
Modify in test exolvuntur - Turn in excelsum concentrationgenergenerator - Satus test - Test post onus tanitas est qualified - trahere curvam secundum totestus results
Technical parametri
Test Flow: 0-99.9LL / min, ± II% F ·
Test area: 100cm2
Test resistentia: 0-500pa libitum (0-125pa) ± I% F ·
Test Period: 45s, Novifacta
Particula contra:
D-Pro 0.3,0,5, 0,7, 1.0, 2.0, 3.0μm, etc;
DH-pro, U / S 0,3, 0.5, 0.7, 1.0, 2.0μm, etc;
D / S 0,2, 0.3, 0.9μm, etc;
Du-pro, 0.15, 0,2, 0,2, 0,2, 0.3, 0.5, 0.7, 1.0μm
Test Aerosol: Nacl et KCL, Dehs aut oleum.
Dimensiones (L × w ×) 750mm × 750mm × 1500mm
Environment requisita
Temperature: (XXIII ± V) ° C
Vox Supple: CCXX V AC, 50Hz et 60Hz, 1000W
Aeris compressione> 0,5 MPA 160L / min
Clear Aeris Source System (libitum)
Aeris compressor: Aeris repono facultatem 160L,
Pressura 0.7MPA,
exhauriunt volumen 520l / min,
Voltage 380V aut 220V,
Power 6kw
Precision Spurcamen: curatio facultatem 1m3 / min,
Presst≤ 0.8MPA
Frigidus Dryer: Curatio Capacity≥ I M3 / min,
Pressorium I MPA,
Voltage CCXX V
Pressura reducendo valvae, pressura ≤ 1Pa,
pressura regulating range 0.5-0.9MPA
