IEST-RP-CC001 is a recommended practice published by the Institute of Environmental Sciences and Technology. It provides guidance on the terminology, تصنيف, بناء, performance and testing of HEPA and ULPA filters.
Unlike EN 1822 و ايزو 29463, IEST-RP-CC001 should not be presented as an identical filter-classification system. The required test method, الهباء الجوي, measurement instrument and acceptance criteria should be selected according to the specified filter type, application and contractual requirement.
Filter Performance Testing
Filter performance is evaluated by challenging the filter with a specified test aerosol and comparing the upstream and downstream concentrations. The test method must match the filter type, required efficiency level and specified measurement range.
اعتمادا على الإجراء المعمول به, particle-counting or photometric methods may be used. The aerosol and instrument should therefore not be selected independently from the required test method.
Overall Efficiency and Penetration
Overall efficiency represents the average performance of the complete filter under the specified airflow and test conditions. The report should identify the aerosol, تدفق الهواء, measurement method and particle-size basis used for the test.
Local leak testing is used to identify defects in the filter media, media-pack seal or frame connection. The scanning method, probe movement, sampling flow and acceptance criterion must follow the selected procedure.
Overall efficiency testing and local leak testing serve different purposes. Passing an overall efficiency test does not by itself confirm that the filter has no local defect.
| Standard or Practice | Main Role |
| IEST-RP-CC001 | Recommended practice covering HEPA and ULPA filter terminology, تصنيف, performance and testing |
| في 1822 | European classification and testing of EPA, HEPA and ULPA filters using MPPS-based methods |
| ايزو 29463 | International classification and testing of high-efficiency filters and filter media using MPPS-based methods |
| ايزو 14644-3 | Test methods used for cleanroom and clean-zone performance verification, including installed filter-system leakage testing |
These documents are related but not interchangeable. The standard or recommended practice specified by the customer, project or regulatory requirement should be used for acceptance.
يضمن اتباع الإجراءات الموحدة أداءً ثابتًا للمرشح والتحكم الموثوق في التلوث.
Manufacturers may use the applicable procedures for:
يلعب IEST-RP-CC001 دورًا مهمًا في الحفاظ على أداء غرف الأبحاث من خلال توفير الممارسات الموصى بها للتحقق من سلامة المرشح وكفاءته.
أخبرنا بنوع الفلتر الخاص بك, معيار الاختبار, وسيناريو التطبيق.
سيساعدك مهندسونا في تحديد حل الاختبار الأكثر ملاءمة - بدءًا من الأنظمة القياسية وحتى الأنظمة الأساسية المخصصة بالكامل.
خبراؤنا على استعداد لتصميم حل مخصص لك. أخبرنا عن مشروعك, ودعنا نتحقق من جودتك بدقة وسرعة.
*نحن نحترم سريتك وجميع المعلومات محمية.
غير متأكد من المعيار الدولي الذي ينطبق على مشروعك? تحدث مع كبار المهندسين لدينا للحصول على تقييم فني شخصي بناءً على خبرتنا الصناعية الممتدة على مدار 10 سنوات.
