IEST-RP-CC001 is a recommended practice published by the Institute of Environmental Sciences and Technology. It provides guidance on the terminology, classificação, construção, performance and testing of HEPA and ULPA filters.
Unlike EN 1822 e ISO 29463, IEST-RP-CC001 should not be presented as an identical filter-classification system. The required test method, aerossol, measurement instrument and acceptance criteria should be selected according to the specified filter type, application and contractual requirement.
Filter Performance Testing
Filter performance is evaluated by challenging the filter with a specified test aerosol and comparing the upstream and downstream concentrations. The test method must match the filter type, required efficiency level and specified measurement range.
Dependendo do procedimento aplicável, particle-counting or photometric methods may be used. The aerosol and instrument should therefore not be selected independently from the required test method.
Overall Efficiency and Penetration
Overall efficiency represents the average performance of the complete filter under the specified airflow and test conditions. The report should identify the aerosol, fluxo de ar, measurement method and particle-size basis used for the test.
Local leak testing is used to identify defects in the filter media, media-pack seal or frame connection. The scanning method, probe movement, sampling flow and acceptance criterion must follow the selected procedure.
Overall efficiency testing and local leak testing serve different purposes. Passing an overall efficiency test does not by itself confirm that the filter has no local defect.
| Standard or Practice | Main Role |
| IEST-RP-CC001 | Recommended practice covering HEPA and ULPA filter terminology, classificação, performance and testing |
| EM 1822 | European classification and testing of EPA, HEPA and ULPA filters using MPPS-based methods |
| ISO 29463 | International classification and testing of high-efficiency filters and filter media using MPPS-based methods |
| ISO 14644-3 | Test methods used for cleanroom and clean-zone performance verification, including installed filter-system leakage testing |
These documents are related but not interchangeable. The standard or recommended practice specified by the customer, project or regulatory requirement should be used for acceptance.
Seguir procedimentos padronizados garante desempenho consistente do filtro e controle confiável de contaminação.
Manufacturers may use the applicable procedures for:
IEST-RP-CC001 desempenha um papel importante na manutenção do desempenho da sala limpa, fornecendo práticas recomendadas para verificar a integridade e eficiência do filtro.
Diga-nos o seu tipo de filtro, padrão de teste, e cenário de aplicação.
Nossos engenheiros ajudarão você a identificar a solução de teste mais adequada — desde sistemas padrão até plataformas totalmente personalizadas.
Nossos especialistas estão prontos para projetar uma solução personalizada para você. Conte-nos sobre seu projeto, e vamos verificar sua qualidade com precisão e rapidez.
*Respeitamos a sua confidencialidade e todas as informações são protegidas.
Não tenho certeza de qual padrão internacional se aplica ao seu projeto? Fale com nossos engenheiros seniores para uma avaliação técnica personalizada com base em nossa experiência de 10 anos no setor.
