Home » Products » Other » Mask Protective Effect Test Equipment SC-MT-1603

Product Category

News

Mask Protective Effect Test Equipment SC-MT-1603

Mask Protective Effect Test Equipment SC-MT-1603

Test results: filter efficiency, protective effect, inward leakage, total inward leakage, inhalation resistance, air flow resistance.
Particulate matter in the ambient air was used as the test aerosol. The test is a non-standard test condition, but the final result corresponds to the test result under the standard test condition through calibration.
SC-MT-1603 is equipped with GB adult dummy head, which display the filter efficiency and resistance under the test condition of 85L/min air flow and NaCl aerosol.
SC-MT-1603EN is equipped with Sheffield dummy head, which display the filter efficiency and resistance under the test condition of 95L/min air flow and oil aerosol.

Quantity:
Availability:





Inquire Add to Basket

Model:
SC-MT-1603
Brand:
scince

Product Description

Review

Non—standard tester, used for the horizontal contrast and the comprehensive performance evaluation of different masks.

Test results including filtration efficiency, protective effect, inhalation resistance, edge resistance, inward leakage and total inward leakage.

Flow is adjustable, counter is 6 channels.

Equipped with standard head mould, 3d jig, used for auxiliary mask testing.

System on chip design, touch screen control, simple and intuitive.

Built-in printer, results can be printed directly.

Applications

Mask display

Mask QC, R&D for manufacture

Technical Parameters

Test flow	Corrected to 85L/min
Flow meter accuracy	±2.5%
Pressure gauge accuracy	1%
Aerosol	Paticulates in the air
Power	AC220V, 50 or 60 Hz, customized available