SC-FT-1406DH-Plus Automatic Filter Tester is different from other ordinary filter efficiency tester because of its excellent performance in high efficiency test range and accurate data. It is applicable to some high filter efficiency test requirements, such as H13 and H14 filter materials, P100 and N100 respirators, and products with high requirements for the accuracy of test results are used as quality inspection. Optional imported 0.1μm counter, can test ULPA filters.
SC-FT-1406D-Plus Automatic Filter Tester is designed to test the initial filter efficiency and resistance of the filter materials. This testing instrument can meet the test requirements for melt blown, electrostatic cotton, PTFE, glass fiber and other filter materials, as well as masks, filters and other industries. Loading test can not be carried out.
SC-FT-1802D-Plus automatic filter tester (Delta P) is designed to test the initial filter efficiency and resistance of filter material, and the differential pressure of the medical face mask.
It can meet the requirements for initial filter efficiency and resistance test of filter materials such as melt blown, electrostatic cotton, PTFE and glass fiber, as well as mask, filter and other industries. No loading test function.
The test results of this instrument are accurate and can be compared with TSI 8130.
SC-FT-1802 uses a single oily generator to generate oily aerosol and display the oily test results.
The adjustment of different test flow can be realized through the flow regulating valve at the prominent part of the panel.
SC-13011 Small Filter Tester is used to test the filter efficiency and resistance of small filters. Its technical specifications comply with the relevant product standard EN 1822-5 high efficiency air filter (EPA, HEPA, ULPA) filter element efficiency measurement.
Test results: filter efficiency, protective effect, inward leakage, total inward leakage, inhalation resistance, air flow resistance.
Particulate matter in the ambient air was used as the test aerosol. The test is a non-standard test condition, but the final result corresponds to the test result under the standard test condition through calibration.
SC-MT-1603 is equipped with GB adult dummy head, which display the filter efficiency and resistance under the test condition of 85L/min air flow and NaCl aerosol.
SC-MT-1603EN is equipped with Sheffield dummy head, which display the filter efficiency and resistance under the test condition of 95L/min air flow and oil aerosol.
Test indexes: filter efficiency and resistance of melt-blown, medical face mask, non-powered air-purifying particle respirator N/P 95/99, FFP 1/2/3, filter element etc.
Particulate matter in the ambient air was used as the test medium. The test is a non-standard test condition, but the final result corresponds to the test result under the standard test condition through calibration.
FKC-IB Microbial Air Sampler is a porous suction type dust sampler, which adopts the principle of constant velocity sampling and samples directly. The wind speed at the collection port is basically the same as that in the clean room, which can more accurately reflect the microbial concentration in the clean room.