Home » Products » Other » Particulate Filter Penetration Test Equipment used for Air-purifying Respirator Filters SC-FT-1802D-Plus

Product Category

News

Standard-HEPA Filter Standard ISO 29463 VS EN 1822
Comparison of EN 1822, ISO 29463, and IEST-RP-CC003.4: Testing, Classification, Particle Size Considerations, and Application Scope
Application in the Field of New Energy -F Class, Large Size Air Filter Test

Particulate Filter Penetration Test Equipment used for Air-purifying Respirator Filters SC-FT-1802D-Plus

Particulate Filter Penetration Test Equipment used for Air-purifying Respirator Filters SC-FT-1802D-Plus

SC-FT-1802 automatic filter tester (Delta P) is designed to test the initial filter efficiency and resistance of filter material, and the differential pressure of the medical face mask.
It can meet the requirements for initial filter efficiency and resistance test of filter materials such as melt blown, electrostatic cotton, PTFE and glass fiber, as well as mask, filter and other industries. No loading test function.
The test results of this instrument are accurate and can be compared with TSI 8130.
SC-FT-1802 uses a single oily generator to generate oily aerosol and display the oily test results.
The adjustment of different test flow can be realized through the flow regulating valve at the prominent part of the panel.

Quantity:
Availability:





Inquire Add to Basket

Model:
SC-FT-1802D-Plus
Brand:
scince

Product Description

Review

Specially designed for plane mask manufacturer. Used to test filter efficiency, resistance, △P (differential pressure).

According to GB 2626—2019, GB 19083, YY 0469, YY/T 0969, NIOSH 42 CFR 84and EN 149.

Press two buttons to start at the same time, test program will run automatically.

Flow is adjustable manually to test flow under different standards.

Touch screen is designed with human-computer interaction, visually displayed.

Calibrated with standard filter paper, the test result can be compared with TSI 8130.

Clean air source system is needed to ensure the air dry and clean.

Built—in printer, the result can be printed directly.

If data acquisition software is selected, the reports can be printed with A4 paper, and remote calibration is available.

Simple operation, no special requirement for operator. Low cost for maintenance.

Applications

Filter efficiency test for filter material and mask.

Resistance test for filter material and mask.

△P (differential pressure) test for medical face mask.

Technical Parameters

Application	Filter Efficiency and Resistance Test
Test Flow	0~99.9L/Min
Test Aerosol	Nacl and Paraffin Oil
Test Area	100cm²
Resistance Range	0~500PA
Test Period	30s
Power supply	AC 220V, 50 or 60 HZ
Dimensions	7407401480mm