SC-L8023U HEPA/ULPA Scanning System

Designed for high-efficiency HEPA and ULPA filters requiring particle measurement from 0.1 μm, MPPS-related efficiency evaluation and sensitive local penetration scanning.
The final configuration depends on the filter class, afmetingen, luchtstroom, expected penetration and required production throughput.

Hoogtepunten

Volgens NL 1822-4, ISO 29463-4, IN 1822-5, ISO 29463-5, GB/T 6165, enz.

Productparameter

Stroomsnelheid 500~4500 m³/u
Differentiële druk 0~1000 Pa
Filterafmetingen Max. 1260*1260*400mm Min. 150*150*50mm(1 doorvragen), 350*150*50mm(4 sondes)
Filter klassen E10~U17, 85%~99,9999995%@0,1μm
Testaërosol DEHS
Deeltjesteller 8 kanalen, 0.1,0.15,0.2,0.25,0.3,0.5,0.7,1.0μm
Scansnelheid ≤10 cm/s
Bemonsteringssondes 1 of 4 sondes, 66*15mm
Persluchttoevoer >7 kg/c㎡
Voeding Wisselstroom 380V, 50Hz
Afmetingen 5700*1800*1800 mm

Over het product

  • Controlled airflow and pressure-drop measurement
  • Stable upstream aerosol challenge
  • Overall filter efficiency measurement
  • Automatic downstream surface scanning
  • Local penetration and leak-position mapping
  • 2D and 3D test-result display
  • Test record, report and label generation
  • Manual rescan for repair verification

Applicable Standards

IN 1822-4 / ISO 29463-4 Local leakage determination for applicable finished EPA, HEPA and ULPA filter classes.
IN 1822-5 / ISO 29463-5 Overall filter-element efficiency or penetration measurement at the required particle size or MPPS.

The test system supports the applicable procedures according to its configured aerosol, particle-measurement range, airflow and scanning arrangement. IN 1822 en ISO 29463 do not certify the cleanliness class of the room in which the filter will be installed.


 

Scope Boundary

Overall efficiency, local leak scanning and installed-system integrity testing are different test tasks. Factory testing of a finished filter does not verify possible leakage through the housing or installation after the filter is installed.

Neem contact op

*Wij respecteren uw vertrouwelijkheid en alle informatie wordt beschermd.

Voordat je gaat...

Weet u niet zeker welke internationale standaard van toepassing is op uw project?? Praat met onze senior engineers voor een gepersonaliseerde technische beoordeling op basis van onze 10-jarige branche-expertise.

*Wij respecteren uw vertrouwelijkheid en alle informatie wordt beschermd.

Valideer uw kwaliteit met wereldwijde standaardtestsystemen

Onze experts staan ​​klaar om voor u een oplossing op maat te engineeren. Vertel ons over uw project, en laten we uw kwaliteit met precisie en snelheid verifiëren.

Aangepaste R&D & Op maat gemaakte oplossingen

Aangepaste R&D & Op maat gemaakte oplossingen

Naleving van mondiale normen

Naleving van mondiale normen

100% Zelf ontwikkeld softwaresysteem

100% Zelf ontwikkeld softwaresysteem

Kalibratie op afstand & Wereldwijde ondersteuning

Kalibratie op afstand & Wereldwijde ondersteuning

Neem contact met ons op

*Wij respecteren uw vertrouwelijkheid en alle informatie wordt beschermd.

This page has been automatically translated from the English original for convenience. Product models, standards, numerical values and technical limits should be verified against the English version. Please contact SCPUR for project-specific confirmation.